2
•
8K MAC Address Table
•
Supports 9.6Kbytes Jumbo Frame
•
4Mbits memory buffer
Power Input
•
Redundant power DC 12~48V with connective 1*6-pin removable terminal block
•
Max. current 3.5A
•
Relay Contact: 24 VDC, 1A resistive
•
The power input specification is complied with the requirements of SELV (Safety Extra Low
Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201.
Certification
•
CE/FCC
•
UL 61010-1
•
UL 61010-2-201
Operating Temperature
•
Standard operating temperature model: -10°C ~ 65°C
•
Extended operating temperature model (–T): -40°C ~ 75°C
Case/Installation
•
IP-30 protection
•
Installation in a Pollution Degree 2 industrial environment
•
DIN-Rail and wall mount design
Package Contents
•
1 - EG5-0802-SFP(-T): 8-port industrial gigabit managed Ethernet switch, with
6*10/100/1000Tx Gigabit Ethernet, and 2*100/1000 SFP slots
•
2 - Wall mounting brackets and screws
•
1 - RJ45 to DB9 Serial Console cable
Safety Precaution
Attention
If the DC voltage is supplied by an external circuit, please use a protection device on the power
supply input. The industrial Ethernet switch’s hardware specs, ports, cabling information, and
wiring installation will be described within this user manual.
Warning Labels
The caution label means that you should check the certain information on user manual when
working with the device. (Shown in Figure 1.1)
