Leonard 944064953, User Manual, Page: 19 / 309

When installed correctly the door trim
clicks.
Make sure that you install the internal glass
panel in the seats correctly.
A
How to replace: Lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
Before you replace the lamp:
Step 1 Step 2 Step 3
Turn off the oven. Wait until
the oven is cold.
Disconnect the oven from
the mains.
Put a cloth on the bottom of
the cavity.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
What to do if...
In any cases not included in this table
please contact with an Authorised Service
Centre.
Problem Check if...
The oven does not
heat up.
The fuse is blown.
The door gasket is
damaged.
Do not use the
oven. Contact an
Authorised Service
Centre.
Problem Check if...
The lamp does not
work.
The lamp is burnt
out.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
Leonard 19