Maintenance
Maintenance operations
Table of lubricants
l
56
BA 12.0023−EN 6.0
7.2.3
Table of lubricants
)
Note!
Please note that the recommendation of a lubricant/grease or its listing in a
Lenze lubricant table does not mean that Lenze is liable for these lubricants or
damages resulting from incompatibilities of materials used.
The lubricants listed in the lubricant table are permissible for Lenze drives. Specialty
lubricants must be used, for example, for long−term storage or special operating
conditions. These corresponding lubricants are available at a surcharge.
During the selection of lubricants, pay attention to the following key for the lubricant
table!
CLP
Þ
Mineral oil
CLP PG
Þ
Polyglycol oil
CLP HC
Þ
Synthetic hydrocarbon or poly−alpha−olefin oil
CLP E
Þ
Diester oil (water pollution class WGK 1)
1)
Þ
No test results are available yet on the lubrication performance of the stated lubricants
for worm gearboxes and GKK07 (hypoid bevel gearboxes). On the use of these oils the
permissible torque is to be reduced to 80% of the catalogue value.
2)
Þ
Polyglycol oils cannot be mixed with other oil types
3)
Þ
At ambient temperatures above 40°C we request consultation on the exact operating
conditions!
4)
Þ
Pay attention to critical starting performance at low temperatures! At temperatures
under −25°C special measures are necessary for the motor bearings and NBR shaft sealing
rings!
ä
Þ
Foodstuff oil (approval in accordance with USDA−H1)
`
Þ
Biodegradable oil (lubricant for forestry, agriculture and water economy)
d
Þ
Low−temperature oils, observe critical starting performance at low temperatures!
