manualshive.com logo in svg

Lenze L-force 8400 Series, Reference Manual, Page: 1232 / 1590

Share
Download
Lenze L-force 8400 Series Reference Manual Download Page 1232

16

Working with the FB Editor

16.4

Reconfiguring the predefined interconnection

1232

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

Changing the processing order according to an automatically generated selection

In addition to the manual selection, the 

Optimisation...

 list field also offers two options for an

automatic adaptation of the processing order:

•

Signal flow

: The processing order is optimised according to the signal flow.

•

Topology

: The processing order is optimised according to the x/y arrangement of the function 

blocks in the FB Editor.

As long as an automatic adaptation has been selected, a manual change of the processing order is

not possible.

16.4.6

Copying interconnection elements (across all devices)

Interconnection elements can be copied across the devices within the project if the devices belong

to the same product family (e.g. Inverter Drives 8400).
All types of blocks and comments can be copied to the clipboard via the 

Copy

 command or the

<Ctrl>+<c>

 shortcut and then be inserted into the FB interconnection of the same or another project

device of the same product family using the 

Paste

 command or the 

<Ctrl>+<v>

 shortcut.

• During the copy process into the clipboard, existing connections between copied blocks are 

copied as well, and the layout is kept too. Moreover, the separate technical objects (e.g port 

definition) are copied. Selected connections cannot be copied on their own.

• The 

Paste

 command is available if the clipboard is not empty and if it was copied from a device 

of the same product family. Within this product family, all device types (e.g. 8400 xxxxLine 

Vxx.xx) are permitted.

• After  the 

Paste

 command has been selected, a dialog box is displayed which serves to select 

which elements are to be inserted from the clipboard and how to solve name conflicts, if any.

• After inserting the elements, they are marked in the target interconnection in order to be 

repositioned or deleted again to undo the insertion.

• Inserting from the clipboard can be repeated. The originally copied contents of the clipboard 

remains unchanged when it is inserted.

How to copy one or several interconnection elements:

1. Select the objects to be copied.

• You can select a single object by clicking the header of the object.
• If you click the header of further objects while pressing 

<Ctrl>

, these will be added to an 

already existing selection (multi-selection).

• You can easily select elements that are placed together by drawing a frame around these 

elements while keeping the mouse button pressed.

• All selected objects are highlighted by a light green header.

2. Go to the 

context menu

 and select the 

Copy

 command (or 

<Ctrl>+<c>

).

• The selected elements are copied into the clipboard of the FB Editor.

3. If the elements are to be copied into a function block interconnection of another project 

device, change to the corresponding interconnection via the 

project view

.

4. Go to the 

context menu

 and select the 

Paste

 command (or 

<Ctrl>+<v>

).

5. Go to the 

Insert FB interconnection

 dialog box and select the elements to be inserted from 

the clipboard.

• Detailed information on this dialog box can be obtained from the following subchapter 

"

Insert options for copied elements

".

 (

1234)

 

Summary of Contents for L-force 8400 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments