Lenze g500-B, Project Planning Manual

Page: 112 / 140

Motor connection
Connection via ICN connector
The electrical connection to the servo motors as a standard is established via ICN connectors.
The connectors can be rotated by 270 ° and are provided with a bayonet catch. Since the catch
of the connector is also compatible with conventional box nuts, existing mating connectors
with a screw plug can continue to be used without any problems.
Motors with a digital absolute value encoder are connected via a hybrid connector for the
one-cable technology. The connection takes place via a Lenze hybrid system cable.
The advantage: all the required wiring takes place in just one plug.
In order to provide for a quick and error-free connection of Lenze motors to
Lenze inverters, we recommend using prefabricated Lenze system cables. In this
way, proper functioning and the compliance with statutory provisions such as
EMC, UL, etc. are ensured.
The use of different cables may cause unexpected faults and may void the
warranty.
Position of the connections
1
2
3
Position Meaning Position Meaning
1 Connector, ICN-M23 6-pole
Connector, ICN-M40 8-pole
•
Power connection
•
Brake connection
•
PE connection
3 Connector, ICN-M23 hybrid
•
Power connection
•
Brake connection
•
PE connection
•
Terminal for digital absolute value encoder
•
Connection of temperature monitoring
2 Connector ICN-M23
•
Feedback connection
•
Connection of temperature monitoring
Product extensions
Motor connection
Connection via ICN connector
112