Safety instructions
Residual hazards
l
53
EDKLCFH3024−EER DE/EN 2.0
1.3
Residual hazards
Protection of persons
ƒ
The
X10, X21 and X20
power connector contacts can conduct hazardous voltages if
the frequency inverter is connected to the mains. Therefore, disconnect the
frequency inverter before carrying out any work on it.
ƒ
The operating temperature of the housing can be > 60°C.
Skin contact may cause burns!
– Do not touch the housing during operation.
– After switching off wait a sufficient period of time before touching the housing.
Motor protection
ƒ
The connected motor can overheat if
– motors are operated on the frequency inverter that do not feature temperature
monitoring with PTC thermistor (PTC) or thermal contact (NC contact)
– temperature monitoring with PTC thermistor (PTC) or thermal contact
(NC contact) is not connected to the frequency inverter.
– temperature monitoring is not activated.
Summary of Contents for ELCAFHI 4E34NNER Series
Page 3: ...ELCAFHIE34NNER_001A ...
