Lenze 8400 motec Series, Software Manual, Page: 266 / 376

8400 motec | Software Manual
Parameter reference
Parameter list | C00420
266
L
Firmware
≤
02.00 - DMS 2.1 EN - 03/2011
C00420
C00425
Parameter | Name:
C00420 | Number of encoder increments
Data type: UNSIGNED_16
Index: 24155
d
= 5E5B
h
From version 02.00.00
Indication of the encoder constant
Encoder/feedback system
Setting range
(min. value | unit | max. value)
1 Incr./rev. 32768
Subcodes Lenze setting Info
C00420/1 128 incr./rev. Number of encoder increments at FreqIn12
;
Read access
;
Write access
;
CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00425 | Encoder scanning time
Data type: UNSIGNED_8
Index: 24150
d
= 5E56
h
From version 02.00.00
Encoder scanning time for the digital input terminals when being configured as frequency inputs
Using DI1 and DI2 as frequency inputs
Selection list
0 1 ms
1 2 ms
2 5 ms
3 10 ms
4 20 ms
5 50 ms
6 100 ms
7 200 ms
8 500 ms
9 1000 ms
Subcodes Lenze setting Info
C00425/1 3: 10 ms Encoder scanning time FreqIn12
;
Read access
;
Write access
;
CINH PLC STOP No transfer COM MOT Scaling factor: 1