Lenze 8200 vector series, Mounting Instructions

Page: 91 / 250

Safety instructions
Application as directed
2
91
EDK82EV222 DE/EN/FR 13.0
2 Safety instructions
Application as directed
8200 vector frequency inverters and accessories
ƒ are components
– for the control of variable speed drives with asynchronous standard motors, reluctance
motors, PM synchronous motors with asynchronous damper cage.
– for mounting into a machine.
– for the assembly with other components to a machine.
ƒ may only be actuated under the operating conditions specified in this documentation.
ƒ comply with the protection requirements of the "Low voltage" EC Directive.
ƒ are not machines in terms of the "Machines" EC Directive.
ƒ are not household appliances, but are solely designed as components for re−utilisation for
commercial use or professional use in terms of EN 61000−3−2.
The drive system (frequency inverter and drive) corresponds to the "Electromagnetic compatibility"
EC Directive if it is installed in accordance with the specifications of the CE−typical drive system.
Any other use shall be deemed as inappropriate!
General safety information
Danger!
Disregarding the following basic safety measures may lead to severe personal injury
and damage to material assets!
The product−specific safety and application notes given in this documentation must be observed!
Note for UL−approved systems: UL warnings are notes which only apply to UL systems. The
documentation contains specific notes with regard to UL.
ƒ Lenze drive and automation components ...
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live, movable or rotating parts during or
after operation. Surfaces can be hot.