72
Information LH100 V3.6
12.2.6 SET_6: LH100 Reset to factory defaults
The "SYS-6" command can be used to reset the LH100 to factory
default.
A Reset operation causes the following settings to change
XpressNET
address = 1
Function 'St'-key = STOP
language = German
contrast LCD = 2
bit edit = 1...8
To configure this setting go to the SET menu:
Press
On the display you see
Explanation
al
alternates with
The LH100 display alternates
between "RESET" and "LH100"
blinks quickly
'Enter' confirms the desire to perform
a reset. Press 'Enter' a second time
to start a reset or 'Esc' to abort the
operation.
blinks slowly
The reset operation starts with
"Reset" on the LH100 display. After
about 5 seconds the display goes
through several displays as it resets
When the reset is completed the
LH100 returns to locomotive
operation.
