Information LH100 V3.6
67
12.2.1 SET_1: Setting the function of the ‘Stop’ key
You can use this system setting to configure the operation of the 'St'
Stop key.
the locomotives are
stopped, but the power to
the track remains on
or
the power to the track is
turned off
To configure this setting go to the SET menu:
Press
On the display you see
Explanation
You reach this display by pressing 'F'
followed by '9' followed by '1'.
By pressing the '1'key, the current
setting is shown. (stop is the factory
default.)
With the ‘+’ (or ‘-’) key you can
change the setting of the mode of 'St'
key.
'Enter' confirms the change, ‘Esc’ lets
you leave the menu without changing
the setting.
You leave the system menu with
‘Esc’, which takes you back to
selecting the settings.
With another ‘Esc’ you return to
controlling locomotives.
12.2.2 SET_2: language selection
Currently, the LH100 allows you the choice between German and
English (US) display text.
To configure this setting go to the SET menu:
Press
On the display you see
Explanation
