Instruction
guide
Creating Solutions for a Healthier Environment.
™
© 20001 Lentek International. All rights reserved.
INSTIO55-0301
All specifications are subject to change without notice.
Dimensions are approximate.
Have you noticed how fresh the air smells after a thunder and lightning
storm or near a waterfall?
Lentek’s Zyonic
™
Technology utilizes the
same process that Mother
Nature does by emitting
safe levels of negative
ions and O3.
IO-55
PET BATH
WATERLESS BATH
PET BRUSH
ION
IC
™
This Limited Warranty is effective upon purchase.
Please complete the attached Registration and return to Lentek
International.
1. Lentek International warrants this product to be free of manufacturing
defects. Should any such defect develop or become evident within
ONE year from the date of purchase, Lentek International will replace
the entire product or, at its option, repair or replace the defective
part(s) without charge.
2. Securely pack the entire unit. Be sure carton clearly identifies sender
by name and address. Attach a letter or card describing the defect.
Original receipt of purchase must be included in returned package for
warranty coverage.
3. This warranty is void if damage or malfunction is due to abuse or failure
to operate product in accordance with instructions and on recom-
mended electrical current.
Mail prepaid via insured parcel post to:
LENTEK INTERNATIONAL • WARRANTY DEPARTMENT
1629 PRIME COURT • SUITE 800 • ORLANDO, FL 32809
LENTEK WARRANTY
Purchase Date ______________
LENTEK INTERNATIONAL, INC.
PO Box 593812
Orlando, FL 32859-3812
Phone: 407•857•8786
Fax:
407•857•4045
Toll Free: 888•3LENTEK
E-Mail:
™
THE TECHNOLOGY BEHIND THE IO-55
CLEANING YOUR BRUSH:
To clean your brush, you must remove the
‘brush plate’ from the ‘brush head.’
IMPORTANT:
DO NOT GET THE
HANDLE or BRUSH
HEAD WET.
To remove the brush plate, hold the handle
firmly in one hand. With the other hand,
using your thumb (illustration D), press firm-
ly in a downward direction on the top of the
brush plate until it snaps out of place. Then
simply lift the brush plate off and remove
any hair that has collected. Rinse it off in
the sink with warm, soapy water.
D
