Chapter 3 Reference information 3-5
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 10, Microsoft Windows 11�
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1� Turn off the computer and all attached devices�
2� Ensure that the monitor is connected correctly�
3� Turn on the monitor and then the system unit� Allow your computer to start the Windows 7
operating system�
4� From the Lenovo website https://pcsupport�lenovo�com/solutions/y27q_30, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop)�
5� Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound
icon� and then clicking the Display icon�
6� Click the
Change the display settings
tab�
7� Click the
Advanced Settings
icon�
8� Click the
Monitor
tab�
9� Click the
Properties
button�
10� Click the
Driver
tab�
11� Click
Update Driver
, then click
Browse the computer to find the driver program
�
12� Select
Pick from the list of device driver program on the computer
�
13� Click the
Hard Disk
button� By clicking the
Browse
button and navigate to the directory that
you put your download drivers in�
14� Select the “
Y27q-30.inf
” file and click the
Open
button� Click the
OK
button�
15� In the new window, select
Lenovo
Y27q-30
, and click
Next
�
16� After the installation is completed, delete all downloaded files and close all windows�
17� Restart the system� The system will automatically select the maximum refresh rate and
navigate to the following directory corresponding Color Matching Profiles�
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality�
Lenovo recommends using either 2560 × 1440 at a refresh rate of 165 Hz, or 640 × 480 at a refresh
rate of 60 Hz�
Summary of Contents for Y27q-30
Page 1: ...Lenovo Y27q 30 User Guide ...
