Lenovo x3250 m6 Installation And Service Manual Download Page 82

Page: 82 / 696

Network connection problems

Table 16. Network connection problems and actions

Symptom

Action

1. Make sure that the license key is valid.

2. Generate a new license key and log in again.

Optional-device problems

Table 17. Optional-device problems and actions

Symptom

Action

A Lenovo optional device that
was installed does not work.

1. Make sure that:

• The device is designed for the server. Go to:

http://www.lenovo.com/ serverproven/

• You followed the installation instructions that came with the device and the

device is installed correctly.

• You have not loosened any other installed devices or cables.
• You updated the configuration information in the Setup Utility. Whenever

memory or any other device is changed, you must update the configuration.

2. Reset the device that you installed.

3. Replace the device that you installed.

A Lenovo optional device that
worked previously does not
work now.

1. Make sure that all of the cable connections for the device are secure.

2. If the device comes with test instructions, use those instructions to test the

device.

3. Reseat the failing device.

4. Replace the failing device.

Operating system boot problem

Table 18. Operating system boot problem and action

Symptom

Action

You cannot boot automatically
in the following operating
systems:

• SUSE Linux

Enterprise

Server 11 with Service Pack
1

• Red Hat

Enterprise Linux 6

To recreate the boot entry manually, do the following:

1. Turn on the server and press F1 to enter Setup Utility.

2. Select

Boot manager

3. Select

Add Boot Option

4. Select the boot entry with the string “*.efi”

5. Type the description such as “OS_Install”. Then, select

Commit Changes

For more information, refer to the tip files at:
http://www.lenovo.com/support

Lenovo System x3250 M6 Installation and Service Guide

Summary of Contents for x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands

Lenovo x3250 m6, Installation And Service Manual

Search results

Summary of Contents for x3250 m6

Reviews:

Related manuals for x3250 m6

Brands by name

Popular brands