Removing the LCD panel
Attention:
Do not open your computer or attempt any repairs before reading the
Important Product
Information Guide
.
CAUTION:
Before you open the LCD panel, turn off the computer and wait several minutes until the
computer is cool.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
4. Remove the LCD panel.
Figure 27. Pulling out the LCD panel screw cap
Figure 28. Removing or loosening the screws
22
V530-24ICB AIO User Guide and Hardware Maintenance Manual
Summary of Contents for V530-24ICB
