Lenovo V50t Gen 2, Hardware Maintenance Manual

Page: 71 / 86

For access, do the following:
1. Remove the computer cover. See “Computer cover” on page 54.
2. Remove the front bezel. See “Front bezel” on page 54.
3. Remove the drive bay assembly. See “Drive bay assembly” on page 56.
4. Disconnect the front fan cable from the system board.
Replacement steps
Rear fan
Prerequisite
Before you start, read Generic Safety and Compliance Notices , and print the following instructions.
For access, do the following:
1. Remove the computer cover. See “Computer cover” on page 54.
2. Remove the front bezel. See “Front bezel” on page 54.
3. Remove the drive bay assembly. See “Drive bay assembly” on page 56.
4. Disconnect the rear fan cable from the system board.
Chapter 6
.
Hardware removal and installation
67