Lenovo V50t Gen 2, Hardware Maintenance Manual

Page: 66 / 86

M.2 solid-state drive
Prerequisite
Before you start, read Generic Safety and Compliance Notices , and print the following instructions.
Attention:
• To replace the Intel Optane memory, go to
https://support.lenovo.com/docs/tg_ssd
.
• The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data. When handling the M.2 solid-state drive, observe the following guidelines:
– Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed
for frequent changes or replacement.
– Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
– Do not touch the contact edge of the M.2 solid-state drive. Otherwise, the M.2 solid-state drive might
get damaged.
– Do not apply pressure to the M.2 solid-state drive.
– Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state
drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Remove the computer cover. See “Computer cover” on page 54.
2. Remove the front bezel. See “Front bezel” on page 54.
3. Remove the drive bay assembly. See “Drive bay assembly” on page 56.
62
V50t Gen 2 Hardware Maintenance Manual