Lenovo V50t Gen 2 Hardware Maintenance Manual Download Page 50

Page: 50 / 86

Problem

Solution

The playback is slow or choppy.

• Disable any background programs, such as AntiVirus or Desktop

Themes.

• Ensure that video resolution is less than 1152 x 864 pixels.

A message indicating invalid disc or no disc
found is displayed.

• Ensure that the disc is in the drive with the shiny side of the disc

facing down.

• Ensure that video resolution is less than 1152 x 864 pixels.

• Ensure that the DVD or CD is inserted into an appropriate optical

drive. For example, do not insert a DVD into a CD-only drive.

Serial connector problems

Problem

Solution

The serial connector cannot be accessed.

• Connect the serial cable from the serial connector on the computer

to the serial device. If the serial device has its own power cord,
connect the power cord to a grounded electrical outlet.

• Turn on the serial device and keep the device online.

• Install any programs supplied with the serial device. Refer to the

documentation that comes with the serial device for more
information.

• If you added one serial-connector adapter, ensure that the adapter

is installed correctly.

USB device problems

Problem

Solution

A USB device cannot be accessed.

• Connect the USB cable from the USB connector to the USB

device. If the USB device has its own power cord, connect the
power cord to a grounded electrical outlet.

• Turn on the USB device and keep the device online.

• Install any device drivers or programs supplied with the USB

device. Refer to the documentation that comes with the USB
device for more information.

• Disconnect and reconnect the USB connector to reset the USB

device.

• Ensure that the Smart USB Protection function is disabled in UEFI

BIOS.

V50t Gen 2 Hardware Maintenance Manual

Summary of Contents for V50t Gen 2























































































Search results

Summary of Contents for V50t Gen 2

Reviews:

Related manuals for V50t Gen 2

Brands by name

Popular brands

Lenovo V50t Gen 2, Hardware Maintenance Manual

Search results

Summary of Contents for V50t Gen 2

Reviews:

Related manuals for V50t Gen 2

Brands by name

Popular brands