57
Lenovo V330-14ISK/V330-14IKB/V130-14IKB/V330-14IGM/V130-14IGM
1110 Touch pad and fingerprint module
For access, remove these FRUs in order:
• “1010 Base cover and dummy case” on page 33
• “1020 Battery pack” on page 37
• “1030 PCI Express Mini Card for wireless LAN” on page 39
• “1040 SSD card” on page 41
• “1050 Hard disk drive” on page 43
• “1060 DIMM” on page 45
• “1070 Fan and heat sink” on page 47
• “1080 Upper case” on page 50
• “1090 Backup battery and RJ-45 cover” on page 53
• “1100 System board” on page 55
Figure 11. Removal steps of touch pad and fingerprint module
Remove the screws
A
,
B
and
C
. Then remove the touch-pad bar and
fingerprint bracket in the direction shown by arrows
D
.
b
b
d
a
c
c
c
d
Step Screw (quantity)
Color
Torque
A
M2 x L2mm, Phillips-head (1)
Black
1.6-2.0 kgf.cm
B
M2 x L2mm, Phillips-head (2)
Black
1.6-2.0 kgf.cm
C
M2 x L2.5mm, Phillips-head (3)
Black
1.6-2.0 kgf.cm
