Appendix E Notices
Customer responsibilities for code installation
The customer is responsible for installation of code.
"Code" can refer to frmware, uEFI, IMM, BIOS, device drivers, utility programs and diagnostics.
Customer responsibilities
You are responsible for downloading or obtaining from Lenovo or IBM, and installing designated
Machine Code (microcode, uEFI, IMM, basic input/output system code (called "BIOS"), utility
programs, device drivers, and diagnostics delivered with a Lenovo or IBM machine) and other
software updates in a timely manner from a Lenovo or IBM Internet Web site or from other
electronic media, and following the instructions that Lenovo or IBM provides. You may request
Lenovo or IBM to install Machine Code changes; however, you may be charged for that service.
Lenovo and / or IBM may release changes to the Machine Code. The Machine Code changes are
available for download by selecting your product from either a Lenovo support web site or from
IBM FixCentral.
You may also obtain updated code by contacting your Lenovo or IBM representative.
If the machine does not function as warranted and your problem can be resolved through your
application of downloadable Machine Code, you are responsible for downloading and installing
these designated Machine Code changes as Lenovo or IBM specifes. If you would prefer, you
may request Lenovo or IBM to install the downloadable Machine Code changes; however, you
may be charged for that service.
For further information see also these support documents:
•
Before you call Lenovo Service
•
Lenovo Data Center (DCG) Server support phone numbers are listed at
https://datacentersupport.lenovo.com/supportphonelist
ThinkSystem Analog 1x8 KVM Switch User Guide
49
