Lenovo ThinkSystem SM27A17643 Page 53 User Manual Download

Page: 53 / 82

Chapter 4 Using the On-Screen Display Interface

Adjusting the OSD Position

You can adjust the on-screen position of the main OSD or the channel ID. Only the

administrator can change the OSD position.

Adjusting the OSD position

1. Log in as the KVM administrator. For details, see

page 13

2. On the Selection Menu, press F1. The SETUP page displays.

3. Press





to select the desired option in the Position feld - Menu or ID.



Menu: Main OSD pages, such as Selection Menu and the login screen.



ID: Channel ID.

Note:

Any user and the 1754-A1T administrator can change the channel ID name.

ThinkSystem Analog 1x8 KVM Switch User Guide

Summary of Contents for ThinkSystem SM27A17643



















































































Search results

Summary of Contents for ThinkSystem SM27A17643

Reviews:

Related manuals for ThinkSystem SM27A17643

Brands by name

Popular brands

Lenovo ThinkSystem SM27A17643, User Manual

Search results

Summary of Contents for ThinkSystem SM27A17643

Reviews:

Related manuals for ThinkSystem SM27A17643

Brands by name

Popular brands