Chapter 4 Using the On-Screen Display Interface
3. On the SETUP page, press F5. The User Confguration page displays.
4. Press
or
to select the desired user.
Press Page Up or Page Down if the desired user is not shown on the current page.
5. Press Enter, and that user's password change page displays. Then follow either
procedure below.
6. After fnishing the user accounts changes, press Esc to exit the User Confguration page.
Changing the administrator's password
Important:
It is strongly recommended to change the admin password. Then note it down
and keep it in a secure place. If you forget the password, the 1754-A1T has to be
replaced. This replacement is NOT covered by warranty or maintenance contract.
1. In the New Password feld, type the new password, and press Enter.
The password can be up to 8 characters long
2. Re-type the password and press Enter.
To abort the changes, press Esc instead.
22
ThinkSystem Analog 1x8 KVM Switch User Guide
