Lenovo ThinkSystem SM27A17643 User Manual Download

Page: 34 / 82

Chapter 2 ThinkSystem Analog 1x8 KVM Switch

Attaching the cable-support bar

1. Insert either end of the cable-support bar into one of the L-shaped holes on a

rackmount bracket.

2. Align the bar's threaded hole with the threaded hole at the end of the rackmount

bracket. Then secure the bar with one of the included cap screws.

3. Repeat the above steps for attaching the other bracket.

Step 2: Rack Mount the 1754-A1T

When rack-mounting the 1754-A1T switch, you can let it face either to the front or the rear of

the rack to meet your needs.

Rack-mounting the 1754-A1T

1. Slide the 1754-A1T switch between the two rackmount brackets.

2. Align two little holes of the bracket with two threaded holes on one side of the 1754-

A1T switch.

3. Secure the bracket to the 1754-A1T switch with two of the included screws.

4. Repeat the same steps for attaching the other bracket.

5. Mount the 1754-A1T switch in the rack by securing the brackets' ears to the rack's front

rails with your own fasteners.

ThinkSystem Analog 1x8 KVM Switch User Guide

Summary of Contents for ThinkSystem SM27A17643



















































































Search results

Summary of Contents for ThinkSystem SM27A17643

Reviews:

Related manuals for ThinkSystem SM27A17643

Brands by name

Popular brands

Lenovo ThinkSystem SM27A17643, User Manual

Search results

Summary of Contents for ThinkSystem SM27A17643

Reviews:

Related manuals for ThinkSystem SM27A17643

Brands by name

Popular brands