Lenovo ThinkSystem D3284 Hardware Installation And Maintenance Manual Download

Page: 94 / 159

Operation

described in

“Replacing a DDIC” (page 134)

, while adhering to guidelines provided in

“Populating drawers”

(page 137)

Accessing the SMC

Upon completing the hardware installation, you can access the controller module’s web-based management

interface—Storage Management Console (SMC)—to configure, monitor, and manage the storage system. Invoke

your web browser and enter the IP address of the controller module’s network port in the address field, then press

Enter.
To sign-in to the SMC, enter the secure login credentials. This assumes proper web browser setup.

IMPORTANT:

For more information about accessing and using the SMC, see the topic about getting started in

the Storage Manager Guide.

In addition to summarizing the processes to configure and provision a new system for the first time, the getting

started topics provide instructions for signing in to the SMC, introduce key system concepts, address browser

setup, and provide tips for using the main window and the help window.

TIP:

After signing-in to the SMC, you can use online help as an alternative to consulting the Storage Manager

Guide.

Configuring and provisioning the storage system

Once you have familiarized yourself with the SMC, use the interface to configure and provision the storage system.

If you are licensed to use the optional replication feature, you may also need to set up the storage systems for

replication. Refer to the following topics within the Storage Manager Guide or online help:

•

Getting started

•

Configuring the system

•

Provisioning the system

•

Using the optional replication feature

NOTE:

See the topic about licensed features in the Storage Manager Guide for instructions about creating a

temporary license, or installing a permanent license.

IMPORTANT:

If the system is used in a VMware environment, set the system’s Missing LUN Response option

to use its Illegal Request setting. To do so, see either the topic about changing the missing LUN response in the

Storage Manager Guide, or see the

set advanced-settings

CLI command topic in the CLI Reference Guide.

Summary of Contents for ThinkSystem D3284
































































































































































Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands

Lenovo ThinkSystem D3284, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for ThinkSystem D3284

Reviews:

Related manuals for ThinkSystem D3284

Brands by name

Popular brands