Lenovo ThinkStation P910, Hardware Maintenance Manual

Page: 38 / 244

Computer components
Notes:
• Depending on the model, your computer might look slightly different from the illustration.
• To remove the computer cover, see “Preparing your computer and removing the computer cover” on
page 101.
1
7
8
4
13
14
15
3
5
2
6
16
12
11
10
9
Figure 3. Component locations
1
Power supply assembly
2
Flex adapter (some models)
3
M.2 solid-state drive (some models)
4
Memory modules (amount varies by model)
5
Multi-function bracket
6
Front fan assembly
7
Optical drive, flex module or flex bay storage enclosure
(amount and combination vary by model)
8
Hard disk drive, hybrid drive, or solid-state drive
(amount and combination vary by model)
9
Front fan assembly
10
Multi-function bracket
11
Cover presence switch (intrusion switch)
12
Heat sink and fan assembly 1
13
PCI card (vary by computer model)
14
Heat sink and fan assembly 2 (some models)
15
Rear fan assembly
16
Direct cooling air baffle
Major FRUs and CRUs
The following illustration shows the locations of the major FRUs and Customer Replaceable Units (CRUs) in
the computer. To remove the computer cover, see “Preparing your computer and removing the computer
cover” on page 101.
Note: Depending on the model, some of the following components might not be available.
32
P910 Hardware Maintenance Manual