Lenovo ThinkStation P500, Hardware Maintenance Manual, Page: 38 / 232

Locating components
Notes:
• Depending on the model, your computer might look slightly different from the illustration.
• To remove the computer cover, see “Removing the computer cover” on page 111.
Figure 4. Component locations
1
Heat sink and fan assemblies (amount varies by model)
2
Memory modules (amount varies by model)
3
Cover presence switch (also called intrusion switch)
4
Optical drive, flex module, or front-access storage
enclosure (amount and combination vary by model)
5
Front fan assembly (available on some models)
6
Hard disk drives, hybrid drives, or solid-state drives
(amount and combination vary by model)*
7
Flex adapter (available on some models)
8
Power supply module
9
Direct cooling air baffle*
10
PCI card (available on some models)
11
Rear fan assemblies*
Locating major FRUs and CRUs
The following illustration shows the locations of the major FRUs and Customer Replaceable Units (CRUs) in
the computer. To remove the computer cover, see “Removing the computer cover” on page 111.
32
ThinkStation P500 and P700 Hardware Maintenance Manual