manualshive.com logo in svg

Lenovo THINKSTATION P320 30BG, User Manual, Page: 48 / 134

Share
Download
Lenovo THINKSTATION P320 30BG User Manual Download Page 48

3. Select

Startup

.

4. Follow the instructions on the right side of the screen to change the startup device sequence.

5. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard).

Then, select

Yes

in the window displayed, and press Enter.

Selecting a temporary startup device

Note:

Not all discs and storage drives are bootable.

To select a temporary startup device, do the following:

1. Depending on the type of the storage device, do one of the following:

• If the storage device is internal, go to step 2.

• If the storage device is a disc, ensure that your computer is turned on. Then, insert the disc into

the optical drive.

• If the storage device is an external device other than a disc, connect the storage device to the

computer.

2. Turn on or restart the computer. Before Windows starts up, repeatedly press and release F12 or Fn+F12

(depending on the keyboard) until Startup Device Menu is displayed.

3. Select the desired storage device and press Enter. The computer then starts up from the device you

select.

If you want to select a permanent startup device, select

Enter Setup

on Startup Device Menu and press

Enter to start the Setup Utility program. For more information about how to select a permanent startup
device, see “Changing the startup device sequence permanently” on page 37.

Exiting the Setup Utility program

To exit the Setup Utility program, do one of the following:

• If you want to save the new settings, press F10 or Fn+F10 (depending on the keyboard). Then, select

Yes

in the window displayed and press Enter.

• If you do not want to save the new settings, select

Exit

➙

Discard Changes and Exit

and press Enter.

Then, select

Yes

in the window displayed and press Enter.

Updating and recovering the BIOS

The BIOS is the first program that the computer runs when you turn on the computer. The BIOS initializes the
hardware components and loads the operating system and other programs.

Updating the BIOS

When you install a new program, hardware device, or device driver, you might be informed to update
the BIOS. You can update the BIOS from your operating system or a flash update disc (available only
on some models).

To update the BIOS, do the following:

1. Go to http://www.lenovo.com/support.

2. To update the BIOS from your operating system, download the flash BIOS update driver according to

your operating system version. To update the BIOS from a flash update disc, download the ISO image
version (used to create a flash update disc). Then, download the installation instructions for the flash
BIOS update driver.

3. Print the installation instructions you download and follow the instructions to update the BIOS.

38

P320 User Guide

Summary of Contents for THINKSTATION P320 30BG







































































































































Reviews:

No comments