Configuring the TPM function
The TPM chip is integrated on the system board and works as a hardware security solution to help you
to encrypt data and protect the server.
To enable the TPM function in the Setup Utility program, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 35.
2. On the
Security
menu, select
TCG Feature Setup
, and then press Enter.
3. Select
TCG Security Features
. Then, set the
TPM Support
to
Active
.
4. Press F10 to save settings and exit the Setup Utility program. The server will restart in order to enable
the TPM function.
Selecting a startup device
If your server does not start up from a desired device such as the disc or HDD as expected, do one of the
following to select the startup device you want:
Note:
Not all discs, HDDs, or other removable devices are bootable.
• To select a temporary startup device, do the following:
Note:
Selecting a startup device using the following method does not permanently change the startup
sequence.
1. Turn on or restart your server.
2. When you see the logo screen, press F12 to display the boot menu. The boot device selection
window opens.
3. In the boot device selection window, use the up and down arrow keys on the keyboard to switch
between the selections. Press Enter to select the device of your choice. Then, the server will start
up from the selected device.
• To view or permanently change the configured startup device sequence, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 35.
2. On the
Startup
menu, follow the instructions on the screen to set the startup device depending on
your needs. You also can set the boot priority for various devices. See “Startup menu” on page 37.
3. Press F10 to save settings and exit the Setup Utility program. The server will follow the startup device
sequence you have set each time you turn on the server.
Exiting the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup Utility program main interface.
If you are on a nested submenu, press Esc repeatedly until you reach the main interface. To exit the Setup
Utility program, you also can do the following:
• Press F10 to save the new settings and exit the Setup Utility program.
• press F9 to return to the default settings.
For more information about the
Exit
menu in the Setup Utility program, see “Exit menu” on page 38.
Updating the BIOS
This topic provides instructions on how to update the BIOS.
System programs are the basic layer of software built into your server. System programs include the POST,
the UEFI BIOS, and the Setup Utility program. The POST is a set of tests and procedures that are performed
40
ThinkServer TS450 User Guide and Hardware Maintenance Manual
Summary of Contents for ThinkServer TS450
