Lenovo ThinkServer TS430 0387 User Manual Download | Manualshive

Page: 195 / 220

background image

Chapter 8. Getting information, help, and service

This chapter contains information about help, service, and technical assistance for products manufactured
by Lenovo and where to go for additional information about Lenovo and Lenovo products.

Information resources

You can use the information in this topic to access useful resources relating to your needs when using
the product.

Using the documentation

Information about your Lenovo system and installed software, if any, or optional devices is available in the
documentation that comes with the product. The documentation can include printed documents, online
documents, readme files, and help files. Most of the documentation for your server is on the documentation
DVD provided with your server. Refer to the troubleshooting information in your server

User Guide

for instructions on how to diagnose problems and do basic troubleshooting. The troubleshooting and
diagnostics information might tell you that you need additional or updated device drivers or other software.
Lenovo maintains pages on the World Wide Web where you can get the latest technical information and
download documentation or device drivers and updates. To access the Lenovo Support Web site, go to:
http://www.lenovo.com/support

For more information about your server documentation, see “Server documentation” on page 2.

If you suspect a software problem, refer to the documentation, including readme files and online help, that
comes with the operating system or software program.

ThinkServer Web site

The ThinkServer Web site provides up-to-date information and services to help you buy, use, upgrade, and
maintain your server. You also can do the following by visiting the ThinkServer Web site at:
http://www.lenovo.com/thinkserver

• Shop for servers as well as upgrades and accessories for your server.

• Purchase additional services and software.

• Purchase upgrades and extended hardware repair services.

• Access the Lenovo Limited Warranty (LLW).

• Access the online manuals for your products.

• Access troubleshooting and support information for your server model and other supported products.

• Download the latest device drivers and software updates for your server model.

• Find the service and support phone numbers for your country or region.

• Find a Service Provider located near you.

Lenovo Support Web site

Technical support information is available on the Lenovo Support Web site at:
http://www.lenovo.com/support

This Web site is updated with the latest support information such as the following:

• Drivers and software

© Copyright Lenovo 2012, 2015

183

«
...
193
194
195
196
197
...
»

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

Brand: IBM Pages: 180

Brand: Synology Pages: 15

NOP1840 PEP-Box

Brand: Newtec Pages: 96

System x3650 M4 BD Type 5466

Brand: IBM Pages: 786

Brand: MISUMI Pages: 18

IDS-5042 Series

Brand: ORiNG Pages: 67

Brand: Kyocera Pages: 207

totalstorage fastt100

Brand: IBM Pages: 160

Brand: MO-SYS Pages: 26

Brand: Alcatel-Lucent Pages: 4

Brand: Polycom Pages: 2

SDSTX3110-121S-LRT

Brand: Transition Networks Pages: 109

Brand: Mozaex Pages: 66

Brand: GIGA-BYTE TECHNOLOGY Pages: 120

Brand: Lantronix Pages: 2

Brand: AMX Pages: 128

Brand: CAAS Audio Pages: 27

Brand: Dell EMC Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands