Lenovo ThinkServer TS430 0387, User Manual

Page: 127 / 220

5. Locate the iKVM key connector on the system board and then insert the iKVM key into the iKVM key
connector.
Note: Make sure that the iKVM key is securely seated on the system board.
Figure 55. Installing the iKVM key
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 170. Then, you can refer
to the Remote Management Module User Guide on the documentation DVD that comes with your server
for more information about the remote management function and server remote management.
Removing the iKVM key
Attention: Do not open your server or attempt any repair before reading and understanding the “Safety information”
on page iii and “Guidelines” on page 85.
This topic provides instructions on how to remove the iKVM key if the server has one installed.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Chapter 6
.
Installing, removing, or replacing hardware
115