Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Page: 73 / 142

3. Remove the screw that secures the riser card assembly. Then, grasp the riser card assembly by its
edges and carefully lift it out of the chassis.
Figure 32. Removing the riser card assembly
4. Remove the two screws that secure the riser card to the bracket. Then, remove the riser card.
Figure 33. Removing the riser card
5. If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
To complete the parts replacement, go to “Completing the parts replacement” on page 95.
Installing the riser card
To install a new riser card, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
Chapter 5
.
Replacing hardware
59