LSI Corporation
- 86 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
Viewing and Changing Device Properties
Figure 57 Manage Power Save – Advanced
2.
Perform one of these two actions:
—
Specify a start and end time, for the drives to be in active state, in the
Start Time
and
End Time
fields,
respectively.
—
Select the
Do not Schedule Drive Active Time
check box to disable the
Start Time
and
End Time
fields.
3.
Press
OK
.
4.13.10
Managing Power Save Settings for the Drive Group
You can change the power save settings for a selected drive group.
Perform the following steps to change the power save settings for a drive group:
1.
Navigate to a drive group in the
VD Mgmt
screen, and press the F2 key.
2.
Navigate to
Manage Power Save Settings
and press Enter.
The
Manage Power Save Settings
dialog appears.
Figure 58 Manage Power Save Settings – Drive Group
3.
Select a power save mode from the
Select power save mode
drop-down list.
A description of the selected mode appears in the dialog.
4.
Press
OK
.
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
