LSI Corporation
- 69 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
LSI SafeStore Encryption Services
Figure 43 Create Security Key
4.
Either use the default security key identifier, or enter a new security key identifier.
NOTE
After you create a security key, the
Enable Security
option is disabled.
This option is reenabled only after you delete the existing key.
5.
Either click
Suggest
to ask the system to create a security key, or you can enter a new security key.
6.
Reenter the new security key to confirm it.
CAUTION
If you forget the security key, you lose access to your data.
Be sure
to record your security key information. You might need to enter the
security key to perform certain operations.
The security key is case sensitive. It must be between 8 and 32 characters and contain at least one number, one
lowercase letter, one uppercase letter, and one nonalphanumeric character (for example, < > @ +). The space
character is not permitted.
NOTE
Non-U.S. keyboard users must be careful not to enter double-byte
character set (DBCS) characters in the security key field. The firmware
works with the ASCII character set only.
4.9.2
Changing Security Settings
Perform the following steps to change the encryption settings for the security key identifier, security key, and
password.
1.
In the
VD Mgmt
screen, navigate to the controller, and press the F2 key.
2.
Navigate to
Drive Security
, and press Enter.
3.
Select
Change Security Settings
, and press Enter.
The
Change Security Key
dialog appears.
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
