LSI Corporation
- 311 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Monitoring Rebuilds and Other Processes
10.21.2
Starting a Learn Cycle Manually
To start the learn cycle properties manually, perform the following steps:
1.
Click the
Physical
tab to open the Physical view.
2.
Select the
BBU
icon in the left panel.
3.
Perform one of these actions:
—
Select
Go To > BBU > Start Manual Learn Cycle
.
—
Right-click the
BBU
icon, and select
Start Manual Learn Cycle
from the pop-up menu.
10.22
Monitoring Rebuilds and Other Processes
The MegaRAID Storage Manager software lets you monitor the progress of rebuilds and other lengthy processes in
the
Group Show Progress
window.
To monitor the progress of these operations, open the show progress window by selecting
Manage > Show Progress
on the menu bar.
The
Group Show Progress
dialog appears.
Figure 195 Group Show Progress Window
The
Group Show Progress
window displays a percent-complete indicator for drive rebuilds. Rebuilds might take a
long time to complete. An up-arrow appears above the drive icon while it is being rebuilt.
Operations on virtual drives appear in the left panel of the window, and operations on drives appear in the right
panel. The type of operations that appear in this window are as follows:
Initialization of a virtual drive
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
