LSI Corporation
- 297 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Changing the Severity Level for Individual Events
For more information, see
Roll Back to Default Individual Event
10.5
Changing the Severity Level for Individual Events
To change the event severity level for a specific event, perform the following steps:
1.
On the
Configure Alerts
window, click the
Alerts Setting
tab.
The
Alerts Setting
portion of the window appears.
2.
Click
Change Individual Events
.
The
Change Individual Events
dialog appears. The dialog shows the events by their ID number, description, and
severity level.
3.
Click an event in the list to select it.
The current severity appears in the
Severity
cell for the selected event.
4.
Click the
Severity
cell for the event.
The
Event Severity
drop-down menu appears for that event, as shown in the following figure.
Figure 184 Change Individual Events Severity Level Menu
5.
Select a different severity level for the event from the menu.
6.
Click
OK
to return to the
Configure Alerts
window.
7.
You may click
Cancel
to discard your current changes and to go back to the
Configure Alerts
window.
8.
In the
Configure Alerts
window, click
OK
to save all the changes made to the events.
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
