LSI Corporation
- 121 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 5: The HII Configuration Utility
Managing Controllers
By default, the same security key identifier is retained.
2.
To change the security key identifier, press the spacebar to deselect
Use the Existing Security Key Identifier
.
3.
Highlight the
Enter a New Security Key Identifier
field, press Enter, and enter the new security key identifier in
the popup window.
4.
Highlight the
Enter Existing Security Key
field and press Enter.
You are required to enter the security key to prevent unauthorized changes to the security settings.
5.
Type the current security key in the popup window and press Enter.
6.
Highlight
Suggest Security Key
and press Enter to have the system create a new security key.
7.
To enter your own new security key, highlight the
Security Key
field, press Enter, and type the new security key.
The
Security Key
field is case-sensitive. The security key must be between eight and thirty-two characters and
must contain at least one number, one lowercase letter, one uppercase letter, and one non-alphanumeric
character (for example, > @ +).
8.
After entering the new security key, highlight
Confirm
and press Enter. Enter the security key again to confirm it.
The security key must match exactly the characters you entered in the
Security Key
field.
9.
If you do not want the controller to require a password at boot time, deselect the
Pause for Password at Boot
option by highlighting it and pressing the spacebar.
This option is selected by default.
10. To enforce strong password restrictions, highlight
Enforce Strong Password Security
and press the spacebar.
A strong password must be between eight and thirty-two characters and must contain at least one number, one
lowercase letter, one uppercase letter, and one non-alphanumeric character (for example, > @ +).
11. Highlight the
Password
field, press Enter, and type the new boot time password.
12. Highlight
Confirm
and reenter the new password.
The password must match exactly the characters you entered in the
Password
field.
13. Record the drive security information and store it in a safe place.
14. Highlight the
I Recorded The Security Settings
... field and press the spacebar to select it.
15. Highlight
Change Security Key
and press Enter.
16. When the popup window appears, confirm that you want to change the security settings and select
Yes
.
The security changes are entered for the drives connected to this controller.
5.4.8
Saving the TTY Log
The following dialog appears when you select
Save TTY Log
from the
Advanced Controller Management
menu.
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
