Lenovo ThinkServer RD350G, User Manual And Hardware Maintenance Manual

Page: 93 / 186

Installing the TMM
To install the TMM, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See
“Removing or extending the server from the rack cabinet” on page 57.
3. Remove the server cover. See
“Removing the server cover” on page 57.
4. Remove the Lenovo ThinkServer RAID 720i PCIe Adapter. See
“Removing a PCIe card” on page 88.
5. Position the TMM above the Lenovo ThinkServer RAID 720i PCIe Adapter and align the two holes in the
TMM with the two pins on the adapter. Then, lower the TMM straight down until it is securely seated.
Figure 38. Installing the TMM
6. Install the Lenovo ThinkServer RAID 720i PCIe Adapter with the TMM. See
“Installing a PCIe card”
on page 85.
Removing the TMM
To remove the TMM, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See
“Removing or extending the server from the rack cabinet” on page 57.
3. Remove the server cover. See
“Removing the server cover” on page 57.
4. Remove the Lenovo ThinkServer RAID 720i PCIe Adapter. See
“Removing a PCIe card” on page 88.
Chapter 6
.
Replacing hardware
79
your eading and
page and page
your eading and
page and page