Lenovo ThinkPad T495 Hardware Maintenance Manual Download Page 79

Page: 79 / 109

When installing:

• Ensure that the battery connector is attached firmly.

• Ensure that the base cover assembly is attached firmly; otherwise, battery connection may fail.

1100 Thermal fan assembly

For access, remove this FRU:
• “1020 Base cover assembly and dummy Nano-SIM-card tray” on page 65

Removal steps of the thermal fan assembly

When installing:

• Ensure that the connector is attached firmly.

• Do not press the top of the fan cover and the fan hub.

• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on

the parts marked

as shown in the following illustrations. Either too much or too less application of

grease can cause a thermal problem due to imperfect contact with a component.

Chapter 8

Removing or replacing a FRU

Summary of Contents for ThinkPad T495














































































































Search results

Summary of Contents for ThinkPad T495

Reviews:

Related manuals for ThinkPad T495

Brands by name

Popular brands

Lenovo ThinkPad T495, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad T495

Reviews:

Related manuals for ThinkPad T495

Brands by name

Popular brands