Chapter 1.
1-8
Connecting cables
After assembling your monitor, you must connect cables correctly to use the monitor and
computer. Your monitor can be used with either the Tiny installed in the monitor or an external
desktop/laptop computer. To connect cables, do one of the following:
1. If you use the Tiny installed in the monitor, connect the ac power adapter cable and power
cord that comes with the monitor. First connect the ac power adapter cable to the ac power
adapter connector on the monitor.Then, connect one end of the power cord to the ac power
adapter and the other end to a properly-grounded electrical outlet.
Note:
When us
LQJ
ThinkCentre M900x, M910x, M910 or M715 it is recommended to
match 135W adapter which bundled with Tiny for better experience.
2. Use a DisplayPort cable of this type as shown. Connect one end of the DisplayPort cable
to the DisplayPort connector on the monitor and the other end to a DisplayPort connector
on the computer. To locate the DisplayPort connector on the monitor, see
"Locating
connectors and controls on your monitor"on page 1-3.
