manualshive.com logo in svg

Lenovo ThinkCentre M910t, User Manual And Hardware Maintenance Manual, Page: 62 / 65

Share
Download
Lenovo ThinkCentre M910t User Manual And Hardware Maintenance Manual Download Page 62

Replacing FRUs

62

Replacing the system board

Attention

Do not open your computer or attempt any repairs before reading the 

Important 

Product Information Guide

.

1 

Remove the computer cover.  For details, see 

 Removing the computer cover. 

2 

Remove the front bezel.  For details, see 

 Replacing the front bezel. 

3 

Remove the power button.  For details, see 

 Replacing the power button. 

4 

Remove the front I/O bracket.  For details, see 

 Replacing front I/O bracket. 

5 

Pivot the drive bay assembly outward.  For details, see 

 Pivoting the drive bay assembly inward and outward. 

6 

Remove the memory module.  For details, see 

 Replacing the memory module. 

7 

Remove the heat sink and fan assembly.  For details, see 

 Replacing the heat sink and fan assembly. 

8 

Remove the microprocessor.  For details, see 

 Replacing the microprocessor. 

9 

Remove all PCI Express cards.  For details, see 

 Replacing the PCI Express card. 

10 

Remove the Wi-Fi card.  For details, see 

 Replacing the Wi-Fi card. 

11 

Remove the M.2 storage drive.  For details, see 

 Replacing the M.2 storage drive. 

12 

Record the cable routing and cable connections, and then disconnect all cables from the system 
board. See 

 System board. 

Summary of Contents for ThinkCentre M910t


































































Reviews:

No comments