Lenovo ThinkCentre M910t User Manual And Hardware Maintenance Manual Download Page 34 | Manualshive

Page: 34 / 65

Lenovo ThinkCentre M910t User Manual And Hardware Maintenance Manual Download Page 34

Replacing CRUs

34

Replacing the 2.5-inch storage drive in the storage converter

1

Remove the storage converter with the 2.5-inch storage drive. See

Replacing the 3.5-inch storage

drive in the primary or secondary drive bay

Replacing the 3.5-inch storage drive in the front-access storage

2

Replace the 2.5-inch storage drive in the storage converter.

1

2

3

Reinstall the storage converter with the 2.5-inch storage drive. See

Replacing the 3.5-inch storage

drive in the primary or secondary drive bay

Replacing the 3.5-inch storage drive in the front-access storage

Replacing the 2.5-inch storage drive in the tertiary drive bay

1

Remove the computer cover. For details, see

Removing the computer cover.

2

Remove the front bezel. For details, see

Replacing the front bezel.

3

Pivot the drive bay assembly outward. For details, see

Pivoting the drive bay assembly inward and outward.

4

Disconnect the signal cable and the power cable from the 2.5-inch storage drive.

5

Replace the 2.5-inch storage drive in the tertiary drive bay.

«
...
32
33
34
35
36
...
»

Summary of Contents for ThinkCentre M910t


































































Reviews:

No comments