Replacing CRUs
29
Replacing the storage drive
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
1
Remove any media from the drives and turn off all connected devices and the computer.
2
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
3
If your computer is installed with a front Wi-Fi antenna, disconnect the front Wi-Fi antenna cable
from the Wi-Fi card.
4
Remove the computer cover. For details, see
Removing the computer cover and dust shield.
5
Disconnect the storage drive cables from the system board.
6
Replace the storage drive.
1
2
3
4
7
Connect the storage drive cables to the system board.
8
Reinstall the computer cover and reconnect the cables. For details, see
