manualshive.com logo in svg

Lenovo ThinkCentre M900z 10F2, Hardware Maintenance Manual, Page: 38 / 146

Share
Download
Lenovo ThinkCentre M900z 10F2 Hardware Maintenance Manual Download Page 38

•

Card reader slot

Used to hold a card-shaped storage medium so that the card reader can read the data on the storage
medium.

•

DisplayPort in/out connector

Used to receive or send audio and video signals. When a high-performance monitor is attached to this
connector, the computer automatically changes to the computer mode. When another computer is
attached to this connector, the computer automatically changes to the monitor mode.

Note:

When another M900z computer is attached to this DisplayPort in/out connector, disable the DP

Input/Output Device Auto Detection feature. See “Enabling or disabling a device” on page 63. Then,
use the monitor/computer mode switches on both the computers to switch to the monitor mode or
computer mode.

•

Ethernet connector

Used to connect an Ethernet cable for a local area network (LAN).

Note:

To operate the computer within Federal Communications Commission (FCC) Class B limits, use a

Category 5e or better Ethernet cable.

•

Headset connector

Used to connect earphones, headphones, or a headset to your computer.

•

Integrated camera shield control slider

Used to disable the integrated camera physically.

•

Power cord connector

Used to connect the power cord to your computer for power supply.

•

Security-lock slot

Used to secure a Kensington-style cable lock. For more information, see “Attaching a Kensington-style
cable lock” on page 60.

•

Serial connector

Used to connect an external modem, a serial printer, or other devices that use a serial connector.

•

USB 3.0 connector

Used to connect a device that requires a USB 2.0 or USB 3.0 connection, such as a keyboard, a mouse, a
scanner, a printer, or a PDA.

30

ThinkCentre M900z Hardware Maintenance Manual

Summary of Contents for ThinkCentre M900z 10F2



















































































































































Reviews:

No comments