Lenovo ThinkAgile MX3321-F, User Manual

Page: 49 / 126

Chapter 5. Hardware replacement procedures
This section provides installation and removal procedures for all serviceable system components. Each
component replacement procedure references any tasks that need to be performed to gain access to the
component being replaced.
For hardware replacement procedures not listed in this section, you can find replacement instructions here:
https://thinksystem.lenovofiles.com/help/topic/7X01/introduction.html
For more information about ordering parts, see
https://datacentersupport.lenovo.com/us/en/products/servers/
thinksystem/sr650/7x05/parts
Note: If you replace a part, such as an adapter, that contains firmware, you may also need to update the
firmware for that part.
Air baffle replacement
Use this information to remove and install the air baffle.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
Note: Air baffle is not available for some server models.
Remove the air baffle
Use this information to remove the air baffle.
Chapter 4 “ Read
the
installation
Guidelines” on
page 29
“ Power off
the server
for this task”
on page 34
Note: Depending on the model, your server might not have an air baffle installed.
© Copyright Lenovo 2018, 2020
45