Lenovo ThinkAgile HX2320 Appliance, User Manual

Page: 61 / 100

• No errors are shown in the Lenovo XClarity Administrator.
• No errors are shown in the Lenovo XClarity Integrator.
• No errors are shown in the Nutanix Prism Web console.
System fan replacement
Use this information to remove and install a system fan.
Failed or failing system fans can cause overheat and shutdown of the system. Replace a failed system fan as
soon as possible.
A failed chassis fan is indicated by:
• The amber warning LED on node front panel is illuminated.
• The Lenovo XClarity Controller Web interface shows a system fan alert.
• The Lenovo XClarity Administrator Web console shows a system fan alert.
• The Lenovo XClarity Integrator console shows a system fan alert.
• The Nutanix Prism Web console shows a system fan alert.
Remove a system fan
Use this information to remove a system fan. You can remove a hot-swap fan without powering off the
server, which helps you avoid significant interruption to the operation of the system.
“ Read the
installation
Guidelines” on
page 39
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 41
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
Before removing a system fan, remove the top cover.
To remove a system fan, complete the following steps:
Chapter 8
.
Hardware replacement procedures
57