Lenovo ThinkAgile HX2320 Appliance, User Manual

Page: 50 / 100

Table 8. Power supply options (continued)
Fea-
ture
Display Description ThinkAgile HX2320 ThinkAgile HX2321
AV-
WE ThinkSystem 750W (230V)
Titanium Hot-Swap Power
Supply
√ √
AV-
WF ThinkSystem 1100W (230V/
115V) Platinum Hot-Swap
Power Supply
√ √
A failed power supply unit is indicated by:
• The amber warning LED on node front panel is illuminated.
• The Lenovo XClarity Controller Web interface shows a power supply alert.
• The Lenovo XClarity Administrator Web console shows a power supply alert.
• The Lenovo XClarity Integrator console shows a power supply alert.
• The vSphere Web client Hardware Status tab shows a power supply alert
• The Nutanix Prism Web console shows a power supply alert.
Remove a hot-swap power supply
Use this information to remove a hot-swap power supply.
“ Read the
installation
Guidelines” on
page 39
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 41
S035
CAUTION:
Never remove the cover on a power supply or any part that has this label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
S002
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current that is supplied to the device. The device also might have more than one power
46
User Guide for ThinkAgile HX2320 Appliance and HX2321 Node