Lenovo ThinkAgile HX2320 Appliance User Manual Download Page 39 | Manualshive

Page: 39 / 100

background image

Chapter 6. Installing and setting up Lenovo XClarity
Administrator

Lenovo XClarity Administrator is a centralized, resource-management solution that simplifies infrastructure
management, speeds responses, and enhances the availability of Lenovo server systems and solutions. It
runs as a virtual appliance that automates discovery, inventory, tracking, monitoring, and provisioning for
server, network, and storage hardware in a secure environment.

Lenovo XClarity Administrator is used to perform the following functions for the ThinkAgile HX2320 Appliance
and HX2321 Certified Node cluster:

• Managing hardware

• Managing the rack

• Configuration Patterns

• Repository

• Compliance policies

• Updating the management server

• Apply/Activate

For more information about Lenovo XClarity Administrator, see the following Web site:

https://www3.lenovo.com/us/en/data-center/software/systems-management/xclarity/

Deploying Lenovo XClarity Administrator

Use this information to deploy Lenovo XClarity Administrator

Before you begin, make sure that you download the Lenovo XClarity Administrator from Lenovo. Refer to the
ThinkAgile HX Series Best Recipe to determine the correct version to be downloaded.

The ThinkAgile HX Series Best Recipe is available at the following location:

https://support.lenovo.com/us/en/solutions/ht505413

Complete the following steps to deploy Lenovo XClarity Administrator.

Step 1. Download the Lenovo XClarity Administrator image.

The currently supported version of Lenovo XClarity Administrator is available at the following Web
site:

https://support.lenovo.com/us/en/solutions/ht505413

Step 2. Follow the instructions that are available at the following Web site:

http://sysmgt.lenovofiles.com/help/index.jsp?topic=%2Fcom.lenovo.lxca.doc%2Fsetup_installlxca.html

Managing ThinkAgile HX Series servers

After deploying Lenovo XClarity Administrator, enable it to manage the ThinkAgile HX2320 Appliance and
HX2321 Certified Node servers in the cluster.

© Copyright Lenovo 2019

35

«
...
37
38
39
40
41
...
»

Summary of Contents for ThinkAgile HX2320 Appliance





































































































Reviews:

No comments

Related manuals for ThinkAgile HX2320 Appliance

Eserver xSeries 360 Type 8686

Brand: IBM Pages: 74

Brand: TRENDnet Pages: 135

Brand: MSI Pages: 18

Brand: IBM Pages: 1730

376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch

Brand: HP Pages: 169

Brand: D-Link Pages: 40

Brand: Huawei Pages: 2

Brand: Huawei Pages: 52

Brand: Huawei Pages: 122

Brand: Huawei Pages: 131

UPS5000-E-****-FM series

Brand: Huawei Pages: 261

BladeCenter HS22

Brand: IBM Pages: 1

Brand: IBM Pages: 4

eServer 250 xSeries

Brand: IBM Pages: 84

8682 - Eserver xSeries 350

Brand: IBM Pages: 174

Brand: IBM Pages: 145

Brand: IBM Pages: 221

Brand: Z Microsystems Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands