Lenovo ThinkAgile CP Hardware Part Replacement And Component Maintenance Procedures Download

Page: 122 / 162

Installation order

Memory modules must be installed in a specific order based on the memory configuration that you
implement on your node.

The following memory configurations are available:

Independent memory mode population sequence

Table 5. DIMM installation sequence (Independent mode/normal mode)

Number of processor

Installation sequence (connectors)

Processor 1 installed

6, 3, 7, 2, 8, 1, 5, 4

Processor 1 and 2 installed

6, 14, 3, 11, 7, 15, 2, 10, 8, 16, 1, 9, 5, 13, 4, 12

Memory mirroring population sequence

Table 6. DIMM installation sequence (mirror mode/lockstep mode)

Number of processors

Installation sequence (connectors)

Processor 1 installed

(6, 7), (2, 3), (8, 1)

Processor 1 and 2 installed

(6, 7, 14, 15), (2, 3), (10, 11), (1,8), (9, 16)

If you are installing 3, 6, 9 or 12 identical DIMMs for the mirroring mode, comply with the following installation
sequence to achieve the best performance.

Table 7. DIMM installation sequence (mirror mode/lockstep mode for 3, 6, 9 and 12 identical DIMMs)

Number of processors

Installation sequence (connectors)

Processor 1 installed

(6, 7, 8), (1, 2, 3)

Processor 1 and 2 installed

(6, 7, 8), (14, 15, 16), (1, 2, 3), (9, 10, 11)

Memory rank sparing population sequence

Table 8. DIMM installation sequence (sparing mode)

Number of processors

Installation sequence (connectors)

Processor 1 installed

6, 3, 7, 2, 8, 1, 5, 4

Processor 1 and 2 installed

6, 14, 3, 11, 7, 15, 2, 10, 8, 16, 1, 9, 5, 13, 4, 12

Note:

Single-rank RDIMM is not supported by sparing. If you install single-rank RDIMM, it switches to the

independent mode automatically.

114

Lenovo ThinkAgile CP Hardware Part Replacement and Component Maintenance Procedures

Summary of Contents for ThinkAgile CP



































































































































































Search results

Summary of Contents for ThinkAgile CP

Reviews:

Related manuals for ThinkAgile CP

Brands by name

Popular brands

Lenovo ThinkAgile CP, Hardware Part Replacement And Component Maintenance Procedures

Search results

Summary of Contents for ThinkAgile CP

Reviews:

Related manuals for ThinkAgile CP

Brands by name

Popular brands