Lenovo ThinkAgile CP 4000 Series, Hardware Installation Manual

Page: 67 / 84

Figure 39. Dual—interconnect configuration — storage block and network interconnect connections
Peer-link connection (dual-interconnect configuration)
Set up the peer link between the interconnects using the QSFP+ Direct Attach Cables (DACs) that are
provided with the configuration.
1. Connect port 49 on the primary interconnect to port 49 on the secondary interconnect.
2. Connect port 50 on the primary interconnect to port 50 on the secondary interconnect.
Figure 40. Dual-interconnect configuration — inter-interconnect link network connectivity
Chapter 3
.
ThinkAgile CP Setup
59