Lenovo System x3630 M4, Installation And Service Manual

Page: 341 / 1050

Appendix A. Integrated management module II (IMM2) error
messages
When a hardware event is detected by the IMM on the server, the IMM logs that event in the system-event
log in the server.
For each event code, the following fields are displayed:
Event identifier
A hexadecimal identifier that uniquely identifies an event or class of events. In this documentation, the
event identifiers are prefixed with 0x and followed by eight characters.
Event description
The logged message string that appears for an event. When the event string is displayed in the
system-event log, information such as a specific component is displayed. In this documentation, that
additional information appears as variables, such as [arg1] or [arg2].
Explanation
Additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. In the system-event log, severity is abbreviated to
the first character. The following severities can be displayed.
Info:
The event was recorded for audit purposes, usually a user action or a change of states that is
normal behavior.
Warning:
The event is not as severe as an error, but if possible, the condition should be corrected before it
becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error:
The event is a failure or critical condition that impairs service or an expected function.
Alert Category
Similar events are grouped together in categories. The alert category is in the following format:
severity - device
severity is one of the following severity levels:
• Critical: A key component in the server is no longer functioning.
• Warning: The event might progress to a critical level.
• System: The event is the result of a system error or a configuration change.
device is the specific device in the server that caused the event to be generated.
Serviceable
Whether user action is required to correct the problem.
CIM Information
The prefix of the message ID and the sequence number that is used by the CIM message registry.
SNMP Trap ID
The SNMP trap ID that is found in the SNMP alert management information base (MIB).
© Copyright Lenovo 2015, 2016 327