Lenovo System x3630 M4, Installation And Service Manual

Page: 122 / 1050

Step 2. When the prompt
<F1> Setup
is displayed, press F1.
Step 3. From the Setup utility main menu, select Boot Manager .
Step 4. Select Add Boot Option ; then, select USB Storage . Press Enter, and then select Esc.
Step 5. Select Change Boot Order and then select Commit Changes ; then, press Enter.
Step 6. Select Save Settings and then select Exit Setup .
If the embedded hypervisor flash device image becomes corrupt, you can use the VMware Recovery CD that
comes with the system to recover the flash device image. To recover the flash device image, complete the
following steps:
1. Turn on the server.
Note: Approximately 1 to 3 minutes after the server is connected to ac power, the power-control
button becomes active.
2. Insert the VMware Recovery CD into the CD or DVD drive.
3. Follow the instructions on the screen.
For additional information and instructions, see the VMware ESXi Server 31 Embedded
Setup Guide at http://pubs.vmware.com/vsphere-50/topic/ com.vmware.ICbase/PDF/
vsphere-esxi-vcenter-server-50-installation-setup-guide.pdf.
Using the remote presence and blue-screen capture features
The remote presence and blue-screen capture features are integrated functions of the integrated
management module II (IMM2).
The remote presence feature provides the following functions:
• Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
• Remotely accessing the server, using the keyboard and mouse from a remote client
• Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
• Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server when
the IMM detects an operating-system hang condition. A system administrator can use the blue-screen
capture to assist in determining the cause of the hang condition.
For more information on Features on Demand (FoD), including instructions for automating the activation and
installation of the activation key by using ToolsCenter or Lenovo Director, see the Lenovo System x Features
on Demand User's Guide at https://fod.lenovo.com/lkms under the Help section.
Note: The server may need to be restarted to activate the feature.
Obtaining the IP address for the IMM
Use this information to obtain the IP address for the IMM.
To access the Web interface to use the remote presence feature, you need the IP address of the IMM. You
can obtain the IMM IP address through the Setup utility. The server comes with a default IP address for the
IMM of 192.168.70.125. To locate the IP address, complete the following steps:
108
Lenovo System x3630 M4 Installation and Service Guide